PL7220T1550 /PL7220R25 RF Link Low Power Input 25 dB Optical Budget 100 Km

Features & Benefits:

	L-Band: 950 – 3000 MHz
	More than 100 Km. distance
	Powerful management capabilites via a front panel LCD and rack mounted SNMP
	User control and setting of required IMD level
	LNB power control via LCD or SNMP: +13 or 18 VDC
	Variety of RF and optical connectors.

Horizontal Tabs

Product Description

Foxcom’s Platinum L-band products are designed to meet the increasing demand for modularity and high-performance in a small form factor for superior long-distance transmission. With low RF input power and wide dynamic range, the link is designed to provide full specification service up to a full 25 dB optical budget with the PL7220R25 receiver .

Utilizing Foxcom’s DigiRF technology, the user has full control of all important functions for setup, operation, and analysis via the front panel LCD or via the associated subrack SNMP capability.

In addition IMizer, an automated adjustable link calibration embedded system enables the user to align the RF links IMD/CNR to specific linearity performances without a two-tone test. Select the desired IMD for the optical transmitter, either locally or remotely, IMizer automatically adjusts the laser drive to meet the IMD requirements. The IMizer requires the use of a correction factor table above 2.5 GHz.

Each low profile individual transmitter or receiver can be “hot swapped” in the subrack chassis maintaining a best subsystem uptime capability. Each module contains an individual processor to maximize specification performance at all times under demanding user applications.

The PL7220T transmitter and the PL7220R25 receiver are designed for chassis mounting. The associated Platinum chassis, model PL7010, has 12 active slots, one main control processor (MCP) slot and two redundant power supplies. No fans are required even under full subrack loading and full LNB powering.

Specifications

L-Band PL7220T1550 / PL7220R25 Link Low Input Power, 25 dB optical budget [100 Km distance]
RF Specifications	Units	Typical	Minimum	Maximum
Frequency Range - Bandwidth	MHz	950 - 3000		-
Amplitude Response @ unity gain 950-3000 [MHz] any 36 MHz	dB	±1 ±0.2		±2.25 0.25
Gain Stability	dB/24hr	± 0.2		± 0.25
Gain Slope¹	dB	0	-1.5	+1.5
Gain Variation over temperature	dB	± 1.5	-2	2
SFDR²	dB/Hz^2/3	88
SFDR³	dB/Hz^2/3	88
DR (Dynamic Range - single channel)⁴	dB			30
CNR[any 36 MHz]²	dB	34	31	37
Noise Figure (NF)²	dB	38		41
Noise Figure (NF)³	dB	10		13
Output IP3 (OIP3)⁵	dBm	0	-5
Group Delay Variation - linear 950-1200 MHz 1200-3000 MHz	ns	3 1.5
Input/Output Impedance	Ohm	50 or 75
1 dB Compression Point ²	dBm	-16		-15
Phase Noise ⁶	dB	None
Third Order InterModulation [IMD]⁴	dBc	-40	-55	-40
RF Input Signal Range - Total Power	dBm		-50	-25
Maximum input without damage	dBm			+15
Output Signal Range - Total Power⁷ -35 dBm input⁸ -55 dBm Input⁹	dBm		-55 -45	-25 -25
TX/RX Input/Output Return Loss 50 Ohm 75 Ohm¹⁰	dB	-15 -13	-15
Test Port [front panel sample port]¹¹	dB	-20	-22	-18
RF Connector Input/Output Test port	Type	F, SMA, N F, BNC
Optical Specifications		Typical	Minimum	Maximum
Optical Wavelength	nm	1550
Optical Power Output	mW/dBm	2 / 3	1.7/2.5
Optical Budget / Distance 25 dB optical budget	Km	100
RX Optical Input Power	dBm	-18	-22	-13
Optical Connector Types		FC/APC or SC/APC (E2000 option)	-
Optical Return Loss	dB		-60	-55
Electrical Specifications
Supply Voltage	VDC	12
Supply Current ¹² TX, no LNB	Amps	0.45 0.75		0.9
Supply Current [TX with LNB]⁶	Amps	0.9 max.
Supply Current (RX)	Amps	0.45
EMI Rating		EMI Rating: FCC Class A, CE Mark
Physical Specifications
Operating Temperature Range	ºC		-10	+55
Storage Temperature Range	ºC		-45	+85
Relative Humidity		95% non-condensing
Altitude	ft / km	10,000 [3.08 ] operating¹³ 14,000 [12.2] non-operating
Dimensions [D×W×H]	ins/cm	12×0.8×4 / 30.5×2×10.2
Weight	lbs./Kg	0.5 / 0.23
MTBF	Hours	TX: 309,481 RX: 359,057
MTTR	Hours	0.083
Shock & Vibration		Designed for normal transportation environment per section MIL-STD-810E. Designed to withstand 20G at 11 ms [½ sine pulse] in non-operating configuration

^1. Within flatness spec

^2. -25 dBm RF input, link gain = 0 dB, IMD=-40 dBc @ -13 dBm optical input - max. RF input

^3. -55 dBm RF input, link gain =30 dB, IMD=-40 dBc @ -13 dBm optical input - min. RF input

^4. User adjustable

^5. -25 dBm RF in @ IMD=-40 dBc

^6. Direct modulation utilized

^7. Alarm trip point: RED -2 dBm, AMBER -58 dBm

^8. @ 25 dB optical loss

^9. @ 16 dB optical loss

^10. -15 dB @ 950 to 3000 MHz, -11 dB @ 2500 to 3000 MHz

^11. -45 dBm minimum input

^12. Under 10º add 120 mA [laser heating]

^13.^. WIth standard adiabatic derating at 2ºC/1000ft. [0.3 Km.]

All specifications are subject to change without notice.

Ordering Information

PDF version

Search form

PL7220T1550 /PL7220R25 RF Link Low Power Input 25 dB Optical Budget 100 Km

Horizontal Tabs