PL7011 Power Supply

Features & Benefits:

	Switching power supply designed for the PL7010 Chassis
	Wide voltage AC input Range 100-240VAC
	High power 15A, 180W
	Embedded M&C microprocessor
	No Fan, high MTBF
	Hot Swap

Horizontal Tabs

Product Description

The PL7011 power supply is a switching power supply designed to power the PL7010 Sat-Light/Platinum chassis. It has a built-in AC voltage auto-sensing circuit and supports an AC voltage input range from 100 to 240VAC.

A single PL7011 power supply provides up to 180 Watts of power, double the maximum power capacity required by a full chassis. Two PL7011 power supplies can be installed in one chassis, to share the load and to provide redundant power and 'hot swap' capabilities.

The embedded microcontroller enables the power supply to support the latest remote monitoring features via the PL700 MCP for parameters such as:

AC alarm
DC alarm
Temperature alarm

In addition, the DC voltage output and the power supply's temperature can be monitored via the MCP.

Dry contact enclosure power supply alarm is available via the chassis system alarm connector.

Specifications

Sat-Light/Platinum Power Supply: PL7011
Power Supply Support
Platform	Sat-Light/Platinum
Protection	temperature Over-voltage Over-current
Power sharing	Active current share with 'hot swap'
Alarms & Monitoring
PS general alarm¹ Temperature alarm AC alarm DC alarm VDC monitoring	Provided through the PL700 MCP controller [embedded GUI or MIB]
Electrical Specifications	Units	Typical	Minimum	Maximum
Prime power input²	VAC	-	100	240
Output voltage	VDC	12	-
Output current	Amps	15
EMI rating		EMI rating: FCC part 15 Class B, CE Mark
Physical/Environmental Specifications
Operating temperature range	Cº		-10	+55
Storage temperature range	Cº		-45	+85
Relative Humidity		95% non-condensing
Dimensions [D × W × H]	in. [cm]	19 × 5.1 × 14 [48.3 × 13 × 35.6]
Weight	lbs [Kg]	5.95 [2.7]
Shock and vibration		Designed for normal transportation environment per section 514.4 MIL-STD-810-E. Designed to withstand 20G at 11ms [½ sine pulse] in non-operating configuration

^1.Provided through the front panel Alarm LED. Additional dry contact enclosure and open collector alarms are provided through the J16 alarm connector.

^2. 50/60 Hz

All specifications are subject to change without notice.

Ordering Information

The PL7011 Sat-Light/Platinum power supply is available either as a stand-alone unit or as part of the PL7010C chassis kit that includes the chassis, the PL700 Micorporcessor card and two PL7011 power supplies.

PDF version

Search form

PL7011 Power Supply

Horizontal Tabs