PL7130T1550 / PL7130R4 10MHz Reference Signal RF Link High Power Input, 4 dB Optical Budget

Features & Benefits:

	Designed to transfer 10MHz reference sine signals
	Equipped with 2nd harmonic filter to improve performances
	Powerful management capabilities via a front panel LCD and rack mounted SNMP
	Variety of RF and optical connectors
	More than 15Km distance.

Horizontal Tabs

Product Description

Foxcom’s Platinum 10 MHz card is designed to meet the increasing demand for modularity and high-performance in a small form factor for superior long-distance transmission. With high RF input power and wide dynamic range, the link is designed to provide full specification service up to a full 4 dB optical budget with the PL7130R4 receiver. Utilizing Foxcom’s DigiRF technology, the user has full control of all important functions for setup, operation, and analysis via the front panel LCD or via the associated subrack SNMP capability.

Each low profile individual transmitter or receiver can be “hot swapped” in the chassis maintaining a best subsystem uptime capability. Each module contains an individual processor to maximize specification performance at all times under demanding user applications.

The PL7130T1550 transmitter and PL7130R4 receiver are designed for subrack chassis mounting. The associated Platinum chassis, model PL7010, has 12 active slots, one main control processor (MCP) slot and two redundant power supplies. No fans are required.

Specifications

PL7130T1550 / PL7130R4, 10MHz Reference RF Link High Power Input, 4 dB Optical Budget [15Km]
RF Specifications	Units	Typical	Minimum	Maximum
Frequency Range - Bandwidth	MHz	10
Amplitude Response @ Unity Gain 5 ± 1 MHz	dB	±0.2		±0.25
Gain Stability	dB/24hr	± 0.2		± 0.25
Gain Slope	dB			+1.0
Gain Variation over temperature	dB		-2	2
DR (Dynamic Range - single channel)¹	dB			30
Noise Figure (NF)²	dB	24	23	26
Input/Output Impedance	Ohm	50 or 75
1 dB Compression Point	dBm	2		3
Phase Noise³	dBm	None
Input Signal Range - Total Power	dBm		-25	0
Maximum Input without Damage	dBm			+15
Output Signal Range [total power]⁴	dBm		-25	+5
TX/RX Input/Output Return Loss 50 Ohm 75 Ohm	dB	-18 -15		-18 -15
Test Port [front panel sample port	dB	-20	-22	-18
RF Connector Input/Output Test Port	F, SMA, BNC, N F, BNC
Optical Specifications	Units	Typical	Minimum	Maximum
Optical Wavelength	nm	1550
Optical Power Output	mW / dBm	2 / 3
Optical Budget / Distance	dBm/Km	1550 nm / 15
RX Optical Input Power	dBm	-1	-2	4
Optical Connector	Type	FC/APC or SC/APC (E2000 option)	-
Optical Return Loss	dB		-60	-55
Electrical Specifications
Supply Voltage	Vdc	12
Supply Current [TX]⁶	Amps	0.5
Supply Current (RX)	Amps	0.45
EMI Rating		EMI Rating: FCC Class B CE Mark
Physical Specifications
Operating Temperature Range	ºC		-10	+55
Storage Temperature Range	ºC		-45	+85
Relative Humidity		95% non-condensing
Altitude	ft / Km	10,000 [3.08 ] operating⁶ 14,000 [12.2] non-operating
Dimensions [D×W×H]	ins/cm	12×0.8×4 / 30.5×2×10.2
Weight	lbs./Kg	0.5 / 0.23
MTBF	Hours	TX: 309,481 RX: 359,057
MTTR	Hours	0.083
Shock & Vibration		Designed for normal transportation environment per section 514.4 MIL-STD-810E. Designed to withstand 20G at 11 ms [½ sine pulse] in non-operating configuration.

^1. User adjustable

^2. -5 dBm RF input, link gain = 10 dB, single tone@ 0 dBm optical input

³^. Direct modulation utilized

^4. Alarm trip point: RED +7 dBm, AMBER -28 dBm

^5. Under 10º add 120 mA for TX [laser heating]

^6. WIth standard adiabatic derating at 2ºC/1000ft. [0.3 Km.]

All specifications are subject to change without notice.

Ordering Information

PDF version

Search form

PL7130T1550 / PL7130R4 10MHz Reference Signal RF Link High Power Input, 4 dB Optical Budget

Horizontal Tabs